8
Carrying the equipment
There are several possible carrying methods:
1. With full equipment
• Remove the battery, the battery-
holder belt, the straps, the holster,
the arm-band and the power cord
from the case.
• Clip the straps to the belt, slide the
power cord through the provided
cable passages.
• Don the vest and adjust the straps:
pull the straps to a comfortable
position and clip the front clips at the
required position.
• Armbands can be used to fix the
cable using the hook and loop quick
fastening. In that way, the cable will
run along the arm and will not hinder
work.
• Fit the battery onto the battery-
holder belt with the socket at the
top. To do that, slip the two straps
through the back battery clips.
To Next Page
Loading...