Need help?Do you have a question about the infaco F3020 and is the answer not in the manual?
Observe country-specific waste disposal rules and regulations for power tools and accessories.
Lists the items included in the F3020 pruning shears package for user reference.
Identifies the main components and controls of the F3020 pruning shears.
Details the components and features of the L100B battery and its charger.
Technical details for standard, medium, and maxi models of F3020 pruning shears.
Technical data for the L100B battery, including voltage, capacity, and weight.
Technical details for the 941C charger, including input, output, and power.
Guidance for the first use of the pruning shears, emphasizing reading all manuals.
Lists batteries compatible with the F3020 shears and notes performance differences.
Instructions on how to carry the pruning shears with all accessories using the vest.
Describes carrying the equipment using only the belt and armband for comfort.
Explains how to carry the battery attached to a trouser belt.
Details the use of the holster for safe carrying and storage of the pruning shears.
Step-by-step guide on how to safely power on the pruning shears.
Essential safety guidelines and precautions to follow before and during operation.
Instructions on how to adjust the blade opening to suit different cutting needs.
Explains how to switch between NORMAL and SOFT operating modes.
Details the meaning of LED indicators for battery charge levels.
Steps to activate the 'closed blade' standby mode for safe storage.
Describes the automatic standby mode triggered by inactivity.
Instructions on how to properly power off the pruning shears.
Explains the automatic shutdown feature activating after prolonged non-use.
Steps for connecting and preparing the battery charger.
Procedure for charging the battery and understanding charging indicators.
Instructions for the battery wintering process for long-term storage.
Explains potential issues if the battery wintering process is not followed.
Recommendations for storing batteries and chargers safely and correctly.
Troubleshooting steps for charger faults related to temperature.
Troubleshooting steps for issues indicated by a steady red charger LED.
How to enter the settings mode to adjust blade opening and overlap.
Step-by-step guide to setting blade opening and overlap ratios.
Introduction to the DSES wireless safety system and how users can disable it.
Important safety rules and usage guidelines for the DSES system.
Guidance on calibrating the DSES system and using recommended conductor gloves.
Visual guide comparing approved and non-approved gloves for DSES system interaction.
Key reminders regarding glove contact and conductivity when carrying the shears.
Illustrations comparing possible and prohibited carrying methods with gloves.
Explanation of LED indicators showing DSES active, inactive, or error states.
How the DSES system behaves during momentary and continuous stops.
Explains causes for untimely DSES triggering and methods to deactivate.
Step-by-step guide to perform the DSES system operational check.
How to check conductivity levels using the bar graph and trigger during calibration.
Steps to confirm calibration completion and return the shears to standby mode.
How to identify and resolve insufficient conductivity issues with the DSES system.
Explains faults indicated by a steady red DSES indicator and troubleshooting.
Information regarding the compatibility of the hard-wired DSES system.
Explanation of LED signals during normal operation of the pruning shears.
LED signals indicating temporary shutdowns due to safety or temperature.
LED signals indicating a flat battery or a device fault.
Instructions on how to properly sharpen the pruning shear blades for optimal performance.
Instructions on performing edging to restore blade sharpness and optimize cut quality.
Comparison of results between good and bad blade servicing practices.
Steps for priming the grease gun to expel air before first use.
Final steps to ensure the grease gun is properly primed and ready for use.
Instructions on how to lubricate the pruning shears at least twice daily.
How to check and adjust blade tightness daily for safe operation.
Step-by-step guide for safely replacing the blade on the pruning shears.
Recommendations for cleaning and disinfecting the cutting head to prevent disease spread.
Recommendations for annual maintenance service for optimal season start.
Rules and guidelines for safely transporting Lithium batteries and the unit.
General safety instructions for handling and operating the pruning shears.
Warnings regarding fire, liquids, children, user capabilities, and hand protection.
Critical reminder to keep hands at least 8 inches away from the tool blade.
Details what is covered and excluded under the product warranty terms.
Information on how to register the warranty and make claims.
Procedures for warranty service, repairs, and warranty extension options.
Provides contact details for technical help and customer service.
Instructions for declaring warranty online for international users.
Sections for dealer information, customer signature, and warranty registration.
Area for the dealer to record the serial number for the customer file.
Provides INFACO's official contact information and location.
An overview of the essential functions and components of the pruning shears.
Step-by-step instructions for starting the pruning shears.
How to activate and deactivate the SOFT operating mode.
Instructions for activating the fast standby mode for quick storage.
Guide to adjusting blade opening and overlap settings.
How to perform a conductivity check while carrying the pruning shears.
Details conductivity levels and their relation to DSES system performance.
Explanation of the temporary stop function of the DSES safety system.
Official statement confirming compliance with relevant CE directives.
To Next Page
General