5
K: “In” Fitting: A ¼” refrigeration flare fitting for connecting the charging module
to the refrigerant cylinder, using a refrigerant charging hose.
Charging Module Setup and Operation
Setting up the Charging Module
1. Place the Wey-TEK weighing platform on a firm, level surface.
2. Connect the communication cable to the Charging Module and the Wey-TEK
weighing platform. Plug the AC/DC power adapter into the Charging Module
and then into its power supply.
CAUTION
Using a non-approved power adapter can
damage the charging module.
3. Turn on the charging module by depressing the On/Off button.
4. Place the refrigerant cylinder on the weighing platform.
B - Display
H - Up Arrow
I - Wey-TEK
Connector
E - Tare/Clear
A - Power
Connection
K - In
G - Right Arrow
F - Charge/Hold
C - On/Off
D - kg/lb
J - Out
To Next Page
Loading...