Infineon DEMO-MIPI-4K-CAM01 User Manual

-
QUICK START GUIDE
SONY IMX715 image sensor accessory board
DEMO_MIPI_4K_CAM01
The DEMO_MIPI_4K_CAM01 SONY IMX715 image sensor accessory board is designed to stream 4K 60 fps video
seamlessly through any kit or board having MIPI interface with speeds up to 2.5 Gbps. This QSG shows how to
connect to FX10 DVK via EFINIX Ti180 FPGA kit.
Kit contents
1. SONY IMX715 image sensor board
2. 22-pin FFC cable
3. Quick start guide (This document)
www.infineon.com/DEMO_MIPI_4K_CAM01

Infineon DEMO-MIPI-4K-CAM01 Specifications

General

Category	Computer Hardware
Manufacturer	Infineon
Model	DEMO-MIPI-4K-CAM01
Camera Interface	MIPI CSI-2
Resolution	4K
Sensor Type	CMOS
Frame Rate	30 fps

Summary

Getting Started with SONY IMX715 Sensor Board

Kit Contents

Lists the items included in the kit: SONY IMX715 image sensor board and 22-pin FFC cable.

Pre-Setup and Connection Steps

Before You Start

Ensures a PC with a USB-C port supporting 5Gbps or 10Gbps data transfer is available.

Step 1: Connect and Power Up

Connects the image sensor board to the EFINIX Ti180 adapter board using the 22-pin FFC cable.

Step 2: Connection with Ti180 FPGA Kit

Connects the sensor board to the EFINIX Ti180 FPGA kit for integration.

Step 3: Final Setup

Connects the Ti180 FPGA board to the FX10 DVK FMC interface.