Infineon MERUS MA12070P - Volumio Installation; Official Volumio Method

User Manual 16 of 24 V 1.6
2021-11-09
MERUS™ audio amp HAT ZW
User manual - KIT_40W_AMP_HAT_ZW
Software setup
Figure 10 moOde audio player GUI. Bluetooth and Airplay configuration.
9. Select “Shutdown” from the menu and then turn on the Raspberry Pi again so the system is rebooted.
Figure 11 moOde audio player GUI. Power menu, restart.
10. Proceed to section 4.4 to configure the MA12070P amplifier settings
4.3 Volumio
4.3.1 Official Volumio method
The MERUS
TM
audio amp HAT software drivers already have support on the official Volumio distribution. To
install the MERUS
TM
Raspberry Pi drivers for Volumio the following procedure should be applied on a Windows,
macOS or Linux computer:
11. Download the Volumio image file from this link.
12. Download balenaEtcher (or any other SD card image burner) from this link and open it.
13. Insert your SD card in the host machine and flash the downloaded Volumio image file to the card.
14. After the burning process, insert the SD card into the Raspberry Pi and turn it on.
v