2 Running radar applications
With each 24 GHz radar, Infineon offers various radar demonstration applications to demonstrate the radar
kits’ capabilities and to facilitate the development of user applications that can be used to detect:
• Motion, speed and direction of movement of multiple targets (approaching or departing)
• Distance of multiple targets
• Position of multiple targets
2.1 Tools and software set-up
2.1.1 Infineon Developer Center (IDC)
Before using the 24 GHz radar demo boards, as well as running the radar demonstration application, it is
necessary to download the supporting software from Infineon.
In order to install and use Infineon plugins and tools, and gain access to the 24 GHz radar software package and
documentation, you must first download and install the Infineon Developer Center (IDC) Launcher (former
Infineon Toolbox) using this link: https://www.infineon.com/cms/en/design-support/tools/utilities/infineon-
developer-center-idc-launcher/
Figure 2 Run Infineon Developer Center Launcher
2.1.2 24 GHz radar IDC tools
Once the IDC Launcher is successfully installed, you can proceed with downloading the appropriate 24 GHz
radar tool: Radar Sense2GoL, Radar Distance2Go, Radar Position2Go, Radar Sense2GoL Pulse or Radar
Distance2GoL including software package and documentation, as detailed in the following instructions:
• Run the Infineon IDC Launcher by double-clicking on the tool icon on your Windows desktop. The program
starts under the My Tools tab, as shown in Figure 3.
To Next Page
Loading...
Need help?
General
