What to do if InfiniSolar Inverter works in battery mode when mains exist?
If your InfiniSolar Inverter continues to operate in battery mode even when mains power is available, it could be due to a tripped input protector. Verify that the AC breaker hasn't tripped and that the AC wiring is securely connected.
Why InfiniSolar Hybrid 1kW has no response after power on?
If your InfiniSolar Inverter isn't responding after you power it on, it could be due to several reasons: * The battery voltage might be critically low (less than 1.4V/Cell). Check the battery and wiring connections to ensure they are secure. You may need to recharge or replace the battery. * The battery polarity might be reversed. Double-check the connections to ensure correct polarity, and then attempt to recharge or replace the battery.
How to fix InfiniSolar Hybrid 1kW Inverter that shuts down automatically during startup?
If your InfiniSolar Inverter shuts down automatically during the startup, it's likely because the battery voltage is too low (less than 1.91V/Cell). To resolve this, try recharging the battery. If the issue persists, consider replacing the battery.
General| Output Voltage | 230 VAC |
|---|---|
| Output Frequency | 50/60 Hz |
| Rated Power | 1000W |
| Battery Type | Lead-acid |
| Battery Voltage | 24 VDC |
| Protection | Overload, Short circuit, Over temperature |
| Operating Temperature | 50°C |
| Cooling | Fan |
To Next Page
