What to do if InfiniSolar Hybrid 4kW works in battery mode when mains exist?
If your InfiniSolar Inverter continues to operate in battery mode even when mains power is available, it could be due to a tripped input protector. Verify that the AC breaker hasn't tripped and that the AC wiring is securely connected.
Why InfiniSolar Inverter has no response after power on?
If your InfiniSolar Inverter isn't responding after you power it on, it could be due to several reasons: * The battery voltage might be critically low (less than 1.4V/Cell). Check the battery and wiring connections to ensure they are secure. You may need to recharge or replace the battery. * The battery polarity might be reversed. Double-check the connections to ensure correct polarity, and then attempt to recharge or replace the battery.
How to fix InfiniSolar Hybrid 4kW Inverter that shuts down automatically during startup?
If your InfiniSolar Inverter shuts down automatically during the startup, it's likely because the battery voltage is too low (less than 1.91V/Cell). To resolve this, try recharging the battery. If the issue persists, consider replacing the battery.
Guidelines for selecting an installation location and mounting the inverter.
Criteria for selecting PV modules, including voltage and current parameters.
Details solar charging specifications and parameters for different inverter models.
Explains the front panel layout including indicators, keys, and LCD.
Details the meaning of each LED indicator on the panel.
Explains the purpose of each function key on the panel.
Configuration settings for exit mode, source priority, and AC input voltage range.
Configuration settings for output voltage/frequency, solar priority, overload, and grid feed-in.
Configuration settings for charger source priority, maximum charging current, and utility charging current.
Configuration settings for battery type and charging voltages (bulk, floating).
Configuration settings for low DC cutoff voltage and stopping discharge voltage with grid availability.
Configuration for battery stop charging voltage when grid is available.
General| Power Output | 4kW |
|---|---|
| Input Voltage | 230 VAC |
| Output Voltage | 230 VAC |
| Max. Efficiency | 93% |
| Battery Voltage | 48 VDC |
| Weight | 12 kg |
| Dimensions | 330 x 485 x 135 mm |
| Max. Input Current | 18A |
| Max. AC Charging Current | 60A |
| Max Charging Current | 60A |
| Rated Power | 4000W |
| Frequency | 50/60 Hz |
| Battery Type | Lead-acid or Lithium-ion |
| Protection | Overload, Short Circuit, Over Temperature |
| Communication | RS232, USB |
To Next Page
