Infinite Element - Connecting IBT Electrodes and Batteries; Powering Element with Flexcell

10 11
WARNING: Turn the battery OFF before plugging in any cables. Do
not attempt to connect the battery or electrodes in a way that is
not specified. This could cause permanent damage to Element, the
battery or electrodes.
CONNECTING IBT ELECTRODES AND BATTERIES
BATTERY OUTPUT CABLE ELEMENT BATTERY INPUT CABLE
IBT ELECTRODE INPUT CABLEELECTRODE OUTPUT CABLE
EMG OUTPUT IBT ELECTRODE INPUT
POWERING ELEMENT WITH FLEXCELL
Turning FlexCell On and Off
To turn on FlexCell, press and hold the charging port button for 3 seconds.
To turn off FlexCell, press and hold the Control Unit button for 3 seconds.
For detailed information on additional FlexCell functions, please refer to the
FlexCell Instructions for Use.