6. When the time is set, it will begin to count down immediately. The display will
show the remaining time
7.Buzzer will beep for 30 seconds and the timer indicator
shows “- - “ when the setting time finished.
d) Setting the timer to turn one or more cooking
zones off
If the timer is set on one zone:
1. Touching the heating zone selection control
that you want to set the timer for.
2. Touch timer control , the “10” will show in the
timer display. and the “0” flashes.
3. Set the time by touching the slider control. (e.g. 5)
4. Touch timer control again, the “1” will flash.
To Next Page
Loading...
