P
ERFORMANCE
D
ATA
UNDERSTANDING MIN/MAX POWER RATINGS
An amplifier with limited power output can actually cause damage to your speakers. A lower-
powered amplifier, when played beyond its power capability, will clip. This generates spurious
high-frequency signals which, when routed to the tweeter, can cause it to overheat and fail. It is for
this reason that choosing an amplifier with higher power is always a wise choice.
SPECIFICATIONS – MICRO II
SATELLITE
Power Rating: 10 to 75 watts per channel, RMS
Frequency Response: 150Hz – 25kHz
Sensitivity: 90dB @ 2.8 volts, 1 meter
Input Impedance: 6 – 8 ohms
SUBWOOFER
Power Rating: 10 to 100 watts per channel, RMS
Frequency Response: 45Hz – 150Hz
Sensitivity: 90dB @ 2.8 volts, 1 meter
Input Impedance: 6 – 8 ohms
7
◆
Micro II Satellite/Subwoofer System – Owner’s Manual
To Next Page
Loading...
