4
◆
Reference Standard (RS-4, RS-5) – Owner’s Manual
S
TEREO
S
PEAKER
P
LACEMENT
...
Figure 2. Experiment with speaker
placement to obtain the best bass level
and stereo imaging in your room.
H
OME
T
HEATER
P
LACEMENT
...
PLANNING YOUR SYSTEM
Before deciding where to put your RS Series floorstanding speakers, survey your room and
think about placement, keeping the following points in mind:
◆
For best results, try placing the speakers closer together than the distance to the
listening area.
◆
Refer to Figure 2 when placing speakers for best bass level and stereo image (see Final
Adjustments on page 6).
◆
Refer to Home Theater Placement (below) if you also plan to use the speakers for home
theater reproduction.
RS-4 and RS-5 floorstanding speakers are also suitable for use in reproducing home theater
sound from front left and right channels.
Place one RS Series floorstanding speaker on the left and another on the right, along either side
of the television monitor. Since the speakers are magnetically shielded, you can set them in very
close without worrying about the field distorting the TV picture.
NOTE: For maximum home theater enjoyment, your audio system should also include a center-channel
speaker and a pair of rear-surround speakers. Moreover, you can add a subwoofer for deep bass impact
on sound effects and music. Contact your local Infinity dealer for recommendations on adding these
home theater speakers to your system.
Listening Position
Left
Channel
Right
Channel
angle speakers
inward to
improve stereo
imaging
move speakers towards corners to increase bass
1092 RS 4,5 om (a).qx 9/11/98 4:54 PM Page 4
To Next Page
Loading...
Need help?
General
