What to do if InfiRay Laboratory Equipment unit will not power on?
If your InfiRay Laboratory Equipment unit won't power on, first check the battery orientation and voltage. Also, verify the voltage of the external power supply to ensure it is sufficient.
How to fix blurry image on InfiRay MH25?
If the image on your InfiRay Laboratory Equipment is blurry, rotate the objective lens until the image becomes clear. Also, perform an image correction, especially if it has been a while since the last one.
Why is there no analog video output from my InfiRay MH25?
If there's no analog video output from your InfiRay Laboratory Equipment, first enable video out in the Function Menu. If that doesn't work, replace the data cable, as the current one may not be compatible.
How to resolve blurry display menu and icons on InfiRay MH25?
To fix blurry display menu and icons on your InfiRay Laboratory Equipment, rotate the diopter ring on the eyepiece until the display becomes clear.
What to do if InfiRay Laboratory Equipment unit fails to turn off?
If your InfiRay Laboratory Equipment unit fails to turn off, tilt the unit downward while pressing the rotary encoder.
Procedure for turning the device on and off using the encoder button.
How to adjust digital zoom levels by rotating the encoder.
Accessing NUC, color palette, and brightness via encoder short press.
Navigating the advanced menu for device settings and calibration.
Instructions for safely replacing the unit's batteries.
Guidelines for cleaning the housing, lenses, and avoiding damage.
General| Brand | InfiRay |
|---|---|
| Model | MH25 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
