21
Using the keypad buttons
Most buttons are described in detail in other sections, but here is an overview of
their functions:
Power–turns the projector on and off (page 8).
Right arrow/Presets - When the menu is displayed, the right arrow button navi-
gates through the menu. When the menu is not displayed, this button cycles
through available preset options.
Up arrow/Keystone - When the menu is displayed, the up arrow button navi-
gates through the menu. When the menu is not displayed, this button adjusts the
squareness of the image (page 9).
Down arrow/Keystone - When the menu is displayed, the down arrow button
navigates through the menu. When the menu is not displayed, this button adjusts
the squareness of the image (
page 9).
Left arrow/Source - When the menu is displayed, the left arrow button navigates
through the menu. When the menu is not displayed, this button brings up a source
menu, allowing the user to change the active source (
page 8).
menu navigation
buttons
To Next Page
Loading...
Need help?
General
