12
Adjusting the image
Position the projector to the desired distance from the screen at a 90 degree
angle to the screen. See the Appendix for screen sizes and distances
associated with the various lens options.
If the image is square but not centered on the screen or viewing area, adjust
Zoom or Focus in the Basic Picture menu. (You can also hold down the
Select button for 10 seconds to turn the focus control on.) Then adjust
Digital Horz Shift and Digital Vert Shift until the image is centered. See
page 28 for help with these menu adjustments.
Rotate the elevator feet for granular adjustment of the projector’s height.
Avoid placing your hands near the hot exhaust vent at the back of the
projector.
Adjust the Contrast or Brightness in the Basic Picture menu. See page 28 for
help with these menu adjustments.
To Next Page
Loading...
Need help?
General
