What to do if the lamp won’t turn on and the temperature light is on in InFocus IN5533 Projector?
If the lamp won’t turn on and the temperature light is illuminated on your InFocus Projector, make sure the vents aren’t blocked. Turn the projector off and allow it to cool for one minute before turning it back on.
Why is the temperature light on InFocus Projector?
The temperature light indicates that the InFocus Projector is too hot. Ensure that the vents are not blocked. Turn the projector off, wait one minute, and then turn it back on. If the problem continues, further assistance may be needed.
General| Resolution | 1920 x 1080 |
|---|---|
| Max Resolution | 1920 x 1080 |
| Display Technology | DLP |
| Projection Technology | DLP |
| Projection Size | 30 - 300 inches |
| Input Lag | 16 ms |
| Connectivity | HDMI, VGA, USB |
| Keystone Correction | Vertical ±40° |
Details about the projector's technical specifications and features.
Details the projector's input and output connectors for various devices.
Guidelines for optimal placement of the projector relative to the screen.
How to connect computers via DisplayLink, VGA, HDMI, and RGBHV.
Additional connections for audio and monitor output.
Instructions for connecting video sources like VCRs, DVD players, and HDTVs.
Steps to display an image and adjust its settings like zoom and focus.
How to use the projector's remote control and keypad buttons.
Navigating and using the projector's onscreen menus for adjustments.
Fine-tuning image quality and customizing projector settings.
Configuring and controlling the projector over a network.
Guides for cleaning the lens and replacing the projection lamp.
Solutions for common problems encountered during setup.
Tables showing projected image size based on screen size and distance.
Specifications and usage notes for optional projector lenses.
To Next Page
