10
Optional computer connections
To get sound from the projector, connect an audio cable (optional cable, sold
separately) to your computer and to the Audio 1 (used with VGA 1) or Audio 2
(used with VGA 2) connector on the projector. You can also assign your source to a
different audio in connector, see page 24 and page 31
. You may also need an
adapter.
If you are using a desktop computer and want to see the image on your computer
scr
een as well as on the projection screen, connect the computer’s monitor cable to
the Monitor Out connector on the projector.
NOTE: Only VGA video is sent to the Monitor out connector
.
To display a presentation using a USB flash drive, see the Using
LitePort section on
page 38. This feature converts presentations to
JPEG images and eliminates the
need for a computer source. It can also be integrated with common wall plates and
conference
room input/output panels.
To advance slides in a PowerPoint presentation using the
remote control, plug the
USB cable between the projector’s DisplayLink connector and your computer. Then
press the up and down arrow buttons on the remote control to move through your
slides.
To Next Page
Loading...
Need help?
General
