6
Connector Panel
The projector provides both computer and video connection options, including:
• VGA computer (2)
• HDMI (2)
•S-video
• Composite video
• Component video
• BNC RGBHV and YPbPr for RGBHV, EDTV and HDTV
• Separate audio inputs for video and computer
• USB DisplayLink connector, for compu
ter audio/video input. This USB
connection also provides power out for the Wireless DisplayLink Projector
Adapter.
The projector also provides the following connectors:
• Monitor out, to provide an image on your deskto
p computer as well as on the
projection screen.
• LAN port for network control and web server.
• LitePort, for connecting a USB flash drive containing JPEG
images.
• Audio out, to provide sound for external
speakers.
• 5 volt DC output
• 12V screen trigger output
• Wired remote jack
• RS-232 connector for serial control. Command co
ntrol codes are in the
Appendix and on our support website at www.infocus.com/support.
NOTE: Only VGA video is sent to the Monitor out connector
.
5 volt DC output
The coaxial 6.4mm x 2.2mm jack provides a constant 5 volt, 2 amp DC output
when the projector is on, and will also provide power when the projector is in
standby (powered off) if Network and DisplayLink items in the Always-On
Functions submenu are set to Yes. It is designed to provide power to an InFocus
LiteShow II wireless device or InFocus DisplayLink Extender device.
12V Screen Trigger output
The 3.5mm mini-jack screen trigger provides a 12 volt, 0.25 amp DC output. It
turns on when the lamp is lighted. If you connect your projection screen to this
output using the cable that came with your screen, the screen will move down when
the lamp is turned on and the screen will return to its storage position, when the
lamp is turned off
To Next Page
Loading...
