There are help commands available on non CLI format. The following non CLI
commands is available in plain text:
help - Prints help screen
cli AAA - Prints help information for the AAA command
cli cmds - Prints an alphabetical list of CLI commands
cli all - Prints the current value of all CLI settings
cli verbose on/off - Turns verbose on and off
1.1.10 Serial Communications Configuration
The following table describes the serial communication configuration that should be
used when interfacing to the CLI via the serial port. Windows HyperTerminal or
Procomm are two tools that can be used to send CLI commands across the serial
port.
Setting Value
Bits per second 19200
Data bits 8
Parity None
Stop bits 1
Flow Control None
Table 1 Configuration
2 TABLE OF COMMANDS
All commands in the table may not be available for your current product. Run the
help command CLI ALL to get a list of supported commands.
Abbreviations:
NA = Not Available, Src.dep = Source depended use a read request with ? to get
current supported range.
Function Comm
and
Attrib
ute
Range Default
Power PWR
R & W
0 – 1
0 – Off
1 – On
0
Rear REA R & W 0 – 1
0 – Off
1 – On
0
Ceiling CEL R & W 0 – 1
0 – Off
1 – On
0
Auto ACL R & W 0 – 1 0
To Next Page
Loading...
Need help?
Display
Projection
Power
