23
Using the keypad buttons
Most buttons are described in detail in other sections, but here is an overview of
their functions:
Power–turns the
pro
jector on and off (page 9).
Auto Image–res
ets the projector to the source.
Presets–cycles through the available
preset settings (page 27).
Keystone–adjusts squareness of the image (pa
ge 10).
Menu–opens the o
n-screen menus (page 26).
Select–confirms choices made in the menus (pa
ge 26).
Up/Down arrows–navigates to and adjusts sett
ings in the menus (page 26).
Volume–adjusts sound (page 22
).
Source–changes the
active source (page 9).
To Next Page
Loading...
Need help?
General
