25
Optimizing video images
After your video device is connected properly and the image is on the screen, you
can optimize the image using the onscreen menus. For general information on using
the menus, see page 26.
• Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Basic Picture
menu (page 27).
• Change the Aspect Ratio. Choose the
option that best fits your input source
(page 27).
• Select a Sharpness setting (page 27).
• Adjust the Color Temperature. Select a listed warmth value (page 28).
• Turn on Overscan to remove noise
on the edges of the image (page 28).
Customizing the projector
You can customize the projector for your specific setup and needs. See page 29 to
page 30 for details on these features.
• For rear projection, turn Rear Project on in the Setu
p menu.
• For ceiling mounted projection,
turn Ceiling Mount on in the Setup menu.
• Specify which source the projector checks first f
or active video during power-
up.
• Specify the function of the Custom key on the remote.
• Turn the projector’s display messages on and off.
• Turn on power saving features.
• Specify appearance of blank screen and
startup screen.
• Specify the language viewed on the menus.
• Save settings for the active source as a preset.
To Next Page
Loading...
Need help?
General
