Infomir MAG520 User Manual

The Product Unpacking and Installation
After the product extraction out of the package it is necessary
to handle it with care, do not drop, shake it and aord other
inuence. The product is designed for horizontal allocation
onto at surface. The product is intended for use indoors.
• Do not place the product onto slippery surface, in place
where it may be exposed to vibration or hazard to drop and
other possible risks to the product to be damaged which
may cause invalidation the product warranty.
• Do not leave the product on soft surfaces such as rugs,
beds, etc. The absence of an air gap between the body of
the set-top box and the surface can lead to overheating and
void the warranty.
• Do not locate the product into the furniture in case of
vacant clearance around the product is not provided for the
sucient product ventilation.
• Do not place the product in place where it may be exposed
to inuence of direct sunlight, next to the sources of open
re and convectors.
• Do not dispose the product on surfaces which in operating
process may get warm, for instance, video record player
or intensier and do not put anything on the top of the
shell as well.
• Do not cover the product with anything.
• Containing liquids objects, such as vase, plant pot are not to
be placed next to or on the product.
• Do not touch or move the product during its operation.
• Switch o the product if you need to shift it.
The power supply cord is to be put to prevent its deformation
and jamming and touching it well. The power supply cord
is not to be laid under the carpets or blocked with anything
where any damage may not be noticed.
Power supply unit
The product should be used with power supply unit provided
by the manufacturer only. The power supply unit is tted
out with plug which is intended for connecting to socket in
your country usage. In case of the necessity in the product
connecting in other country or in the region with other data
of electric circuit the power supply unit adopted for use in
the specied area should be received from the manufacturer.
ForAC/DC Adapter, the socket outlet must be near the
equipment and shall be easily accessible.
Operation
The outer power supply unit of the product is getting warm in
operation. In case of outer power supply unit gets hot, switch
o promptly and get in touch with the equipment supplier for
its replacement.
Protection from atmospheric electricity or not using
for a long time
On coming the thunderstorm and also in case of the product
is intended to be in no use for a long time, disconnect the
power supply cord out of socket, switch o Ethernet, video
and audio cables. It is to protect the product from thunder
discharges and power surges in the circuit.
Usage with Plasma Displays
In the product usage for watching with plasma screens do not
pause the picture for more than 5 minutes, otherwise it with

Infomir MAG520 Specifications

General

Brand	Infomir
Model	MAG520
Category	Set-top boxes
Language	English