Need help?Do you have a question about the Infors HT Ecotron and is the answer not in the manual?
General| Type | Incubator Shaker |
|---|---|
| Shaking Speed | 20 to 400 rpm |
| Shaking Diameter | 25 mm |
| Volume Range | Up to 5 liters |
| Gas Mixing | Optional CO2 control |
| Control Parameters | Temperature, Speed, Time |
| Material | Stainless steel interior, powder-coated exterior |
| Sterilization | Autoclavable components |
| Power Supply | 50/60 Hz |
Defines the intended use, risk categories, and prohibited uses for the Ecotron unit.
Warns about fatal injury risk from electrical contact and provides safety precautions.
Describes the primary operational functions of the Ecotron unit.
Explains the mechanics, table operation, and speed range for the shaking function.
Details how tempering is achieved using a radial fan and heating element for air circulation.
Covers the practical steps involved in installing and setting up the Ecotron unit.
Provides a step-by-step procedure for positioning and preparing the Ecotron unit for operation.
Guides on connecting the equipment to the power supply, including voltage checks and safety.
Describes the procedure for switching on the equipment and its initial self-test and readiness.
Provides essential instructions and warnings for safely loading and unloading the Ecotron.
Identifies and explains all controls, displays, and indicators on the Ecotron's operating panel.
Guides users on adjusting, activating, and deactivating essential operational parameters.
Provides the procedure and important warnings for safely switching off the equipment.
To Next Page
