Need help?Do you have a question about the Infors HT Labfors 5 and is the answer not in the manual?
General| Brand | Infors HT |
|---|---|
| Model | Labfors 5 |
| Category | Laboratory Equipment |
| Language | English |
Defines the proper application and prohibited uses of the bioreactor.
Description of the main components of the basic unit.
Details of the 12" colour-touch screen operating panel.
Information on double and single-walled culture vessels.
Overview of water temperature control and heater pad systems.
Description of the stirrer mechanism and its components.
Details on the gassing system variants and gas types used.
Explanation of pH measurement and control via reagent addition.
Description of pO2 measurement and methods to increase it.
Functionality of the antifoam control system.
Systems available for analysing CO2 and O2 in the exit gas flow.
Functionality and setup of the pressure control system.
Aseptic sampling system to prevent culture vessel contamination.
Procedure for a short test run to familiarize with basic functions.
Preparatory work including checking gaskets and autoclaving.
Steps to connect the vessel and prepare for cultivation.
Steps to prepare the medium and start the bioreactor.
Procedure for taking samples from the culture vessel for analysis.
Methods for adding medium or inoculum before and during cultivation.
Procedures for harvesting the culture at the end of cultivation.
Procedure for autoclaving the vessel after use.
Method for routine cleaning of the culture vessel.
Scheduled maintenance tasks for reliable operation.
To Next Page
