EasyManua.ls Logo

INFOSEC UPS SYSTEM E3 LCD RT IEC 800 - Interpreting LCD Information and Alarms

INFOSEC UPS SYSTEM E3 LCD RT IEC 800
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 10 10 AA 59 203 03
11
Input/Output & battery information
Indicates the input/output voltage, input/output frequency or battery
voltage.
V: voltage; Hz: frequency.
Indicates the external battery pack number.
Load information
Indicates the load level by 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates overload.
Indicates that the load or the UPS output is short circuited.
UPS status
Indicates that programmable management outlets are working.
Indicates that the UPS alarm is disabled.
Indicates the UPS powers the output directly from the mains (see
details page 13).
Indicates that the battery charger is working (see details page 13).
Indicates that the UPS is working in boost mode (see details page
13).
Indicates that the UPS is working in buck mode (see details page 13).
Battery information
Indicates the battery level by 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates low battery.
Indicates a problem with the battery.
3.3 Audible alarms
Battery mode Sounding every 4 seconds.
Low battery Sounding every second.
Overload Sounding twice every second.
Fault Continuously sounding.

Related product manuals