To Next PageTo Next Page
Need help?Do you have a question about the INFOSEC UPS SYSTEM E4 Evolution II + 40k TT HV and is the answer not in the manual?
Guidelines for physically installing the UPS unit.
Warnings related to connecting the UPS to power.
Maintenance, servicing, and troubleshooting guidance.
Information and precautions regarding the UPS batteries.
How to install a single UPS unit.
Installing UPS units for parallel operation.
List and meaning of fault codes.
General| Power Rating | 40 kVA |
|---|---|
| Input Voltage | 400V |
| Input Voltage (min) | 304 V |
| Input Frequency | 50/60 Hz |
| Output Voltage | 400V |
| Phase | 3-phase |
| Frequency | 50/60 Hz |
| Audible alarm(s) | Yes |
| Emergency Power Off (EPO) | Yes |
| Operating Temperature | 0-40°C |
| Safety | IEC/EN 62040-1 |
| Certification | CE |
| Weight | 300 kg |
| Product colour | Black |
| Topology | Double Conversion Online |
| Waveform | Sine wave |
| Battery Type | Sealed lead acid |
| Battery Backup Time | Depends on load and configuration |
| Typical backup time at full load | 3 min |
| Battery technology | VRLA |
| Recharge time | 4 hours to 90% |
| Control panel | LCD display |
| Alarm modes | Battery mode, Low battery, Overload |
| Communication Interface | RS-232, USB, and SNMP |
| Operating relative humidity (H-H) | 0 - 95% |
| Storage relative humidity (H-H) | 0 - 95% |
| Storage temperature (T-T) | -15°C to 45°C |
