Ingenico iUR 250 User Manual

Ingenico – 28-32 Boulevard de Grenelle - 75015 PARIS
Tél. 33(0)1 58 01 80 00 - Fax 33 (0)1 58 01 91 35
iUP 250 & iUR 250
I n t é g r a t i o n G
u i d e

Ingenico iUR 250 Specifications

General

Storage Temperature	-20°C to 70°C
Connectivity	Bluetooth
Card Reader	EMV chip, NFC
Operating System	Linux
Security	PCI PTS 5.x
Ports	USB
Power	Rechargeable battery
Certifications	PCI PTS 5.x

Summary

GENERAL

1.2 iUP250 & iUR250 payment solution presentation

1.3 Description of modules

Details the features and specifications of the iUP250 and iUR250 modules.

1.4 Professional installation Requirement

Outlines the requirements for professional installation of the devices.

SOFTWARE

3.1 iUP250

Details the software aspects of the iUP250.

3.2 iUR250

Details the software aspects of the iUR250.

TERMINAL MANAGEMENT SYSTEM

INSTALLATION PROCEDURE IN KIOSKS

5.1 SECURITY REQUIREMENT

Outlines security requirements for PCI compliance during installation.

5.2 KIOSK MECHANICAL REQUIREMENTS

5.3 GENERAL INSTALLATION RECOMMENDATIONS

5.4 KIOSK SUGGESTED LAYOUTS FOR IUR250 IUP250

5.7 KIOSK GROUNDING CONSIDERATION

Explains the importance and method of grounding the kiosk components.

ASSEMBLY PROCEDURE FOR IUR250 CARD READER

6.1 KIOSK MINIMUM VOLUME FOR IUR 250

6.2 KIOSK PREPARATION FOR IUR250 INSTALLATION

Details the cut-out and preparation steps for installing the iUR250.

6.3 INSTALLING THE READER IUR250

Guides on the physical installation process for the iUR250 reader.

6.5 CONNECTING THE IUR250 TO THE KIOSK GROUND

Explains how to connect the iUR250 to the kiosk's grounding system.

ASSEMBLY PROCEDURE FOR IUP250 PINPAD

7.1 KIOSK MINIMUM VOLUME FOR IUP250

7.2 KIOSK PREPARATION FOR IUP250 NEW INSTALLATION

Details the cut-out and preparation steps for installing the iUP250.

7.3 INSTALLING THE IUP250 PINPAD IN NEW KIOSK

Guides on the physical installation process for the iUP250 PINPad.

7.4 KIOSK PREPARATION FOR IUP250 INSTALLATION AS REPLACEMENT OF 19530 PRODUCT

Describes preparation for installing iUP250 as a replacement for i9530.

7.5 INSTALLING THE IUP250 PINPAD AS REPLACEMENT OF 19530

Details the process of installing iUP250 as a replacement for i9530.

7.6 CONNECTING THE IUP250 TO THE KIOSK GROUND

Explains how to connect the iUP250 to the kiosk's grounding system.

7.7 INSTALLING THE OPTIONAL PINSHIELD

MAINTENANCE

9.1 CONFIGURATION

9.2 PRODUCTS COMMISIONNING

CLEANING INSTRUCTIONS