x R02 0000 05173/10Copyright © 2018INGENICO INC.
Security of your Moby/5500
Upon receipt of your card reader you should check for signs of tampering
of the equipment. It is strongly advised that these checks be performed
regularly.
You should check, for example: that there is no evidence of unusual wires
that have been connected to any ports on your reader or associated
equipment, the chip card slot, or any other part of your reader. Such
checks will provide warning of any unauthorized modifications to your
card reader.
Your reader detects any “tampered state.” If the reader is tampered, the
CLES LEDs will repeatedly flash, and further use of the reader will not be
possible.
Battery
Moby/5500is fitted with a lithium battery (only for Moby/5500 CL3) which
is not accessible to the user.
Only use chargers with rating that match the power ratings.
Moby/5500 can be charged with the USB-C cable connected to a
mobile phone charger.
Do not attempt to open the reader.
Warning
Risk of explosion if battery is replaced by an incorrect type. Do
not disassemble.Do not short-circuit. Do not dispose in fire. Do
not throw in water.
Charging
x Before using the reader for the first time, it should be charged for
approximately 2 hours via a USB port wall charger with power
output of 500mA.
Moby/5500 Card Reader
To Next Page
Loading...
