Ingersoll-Rand D108IN-A User Manual

30 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Cod. 710.0138.45.00 Rev04 – 02.2019

- EN -

DIRECT EXPANSION COMPRESSED AIR DRYERS

Operators Manual

Valid for 60 Hz dryers G version

D12IN-A

230/1/60

D25IN-A

D42IN-A

D54IN-A

D72IN

-

A

D108IN-A

D144IN-A

D180IN-A

D240IN-A

D300IN-A

D360IN-A

D480IN-A

D600IN-A

230/1/60 460/3/60

D780IN-A

380/3/60 460/3/60

D950IN-A

Table of Contents

Questions and Answers:

C
Crystal BrownAug 8, 2025
Why is there low pressure in the line of my Ingersoll-Rand D108IN-A?
- D
  davispatrickAug 8, 2025
  If you're experiencing low pressure in the line of your Ingersoll-Rand Dehumidifier, several factors could be the cause. First, ice might be forming in the evaporator. You should check the probe and the electronic control board; if the problem continues, consider replacing them. You may need to contact a service center to check the gas charge. Alternatively, ensure the compressed air inlet/outlet is properly connected, the connecting tubing isn't clogged, and no valves are closed. Also, inspect the filter's condition. If air flows continuously through the condensate drainage, the drainage solenoid valve might be jammed; try cleaning or replacing it.
S
Samuel WeberAug 22, 2025
What to do if low pressure persists in Ingersoll-Rand D108IN-A Dehumidifier D12-480IN-A or D600-950IN-A?
- R
  rickey24Aug 22, 2025
  For Ingersoll-Rand Dehumidifier model D12-480IN-A with low line pressure, first verify the condensate drainage times set on the electronic control board (C8 and C9). Then, check the signal from the control board. If the signal is continuous, it may be necessary to replace the control board. For model D600-950IN-A, inspect the no loss condensate drain and replace it if the issue persists.

Ingersoll-Rand D108IN-A Specifications

General

Brand	Ingersoll-Rand
Model	D108IN-A
Category	Dehumidifier
Language	English

Summary

WARRANTY

INTRODUCTION

General Information

Provides an overview of the dryer and its basic functions.

Symbols and Labels

Explains the meaning of symbols and labels used in the manual and on the dryer.

INSTALLATION

Acceptance and Transportation

Guidelines for receiving, inspecting, and moving the dryer.

Installation Site

Requirements for the location where the dryer will be installed.

Installation

Step-by-step instructions for the physical installation of the dryer.

START UP

Control Panel

Overview and functions of the dryer's electronic control panel.

Before Start Up

Essential checks and preparations before operating the dryer.

Start Up Sequence

Procedures for initiating the dryer's operation sequence.

MAINTENANCE, TROUBLESHOOTING AND DISMANTLING

Maintenance

Routine service procedures to ensure optimal performance and longevity.

Troubleshooting

Guidance on diagnosing and resolving common operational problems.

Dismantling

Instructions for safely disassembling the dryer.

ATTACHMENTS TO THIS MANUAL

Technical Diagrams and Data

Includes refrigerant circuit, electric diagrams, and technical specifications.

Performance and Physical Data

Covers correction factors, dimensions, and spare parts lists.

Related product manuals

Ingersoll-Rand D1020IN

Ingersoll-Rand D150IM

Preview: Ingersoll-Rand D12IN-A

Ingersoll-Rand D12IN-A

Ingersoll-Rand D18IN-A

Ingersoll-Rand D1190IN

Ingersoll-Rand D144IN-A

Ingersoll-Rand D180IN-A

Preview: Ingersoll-Rand D1300IN-A

Ingersoll-Rand D1300IN-A

Preview: Ingersoll-Rand D41IM

Ingersoll-Rand D41IM

Ingersoll-Rand D221IM

Ingersoll-Rand D600IN-A

Ingersoll-Rand D480IN-A