Ingersoll-Rand Easy lub 86603313 User Manual (English)

Questions and Answers:

M
mhendersonAug 11, 2025
What to do if my Ingersoll-Rand Easy lub 86603313 Water Pump doesn't deliver lubricant?
- S
  Sandra CooperAug 11, 2025
  If your Ingersoll-Rand Water Pump isn't delivering lubricant, there could be a few reasons. First, the lubricant supply might be blocked, so check the cartridge. Second, there might be no oil pressure supply; in this case, check the hydraulic system and repair it. Finally, air may be trapped in the suction area of the cartridge; vent the housing to resolve this.
R
rburkeAug 16, 2025
What to do if lubricant is leaking at the cartridge outlet of my Ingersoll-Rand Easy lub 86603313 Water Pump?
- K
  Kenneth OrtegaAug 16, 2025
  If lubricant is leaking at the cartridge outlet of your Ingersoll-Rand Water Pump, it is probably due to leakage. Check the fittings and retighten them if necessary.
E
Elizabeth HigginsAug 22, 2025
How to fix lubricant leaking at the cartridge inlet on my Ingersoll-Rand Easy lub 86603313 Water Pump?
- J
  Janice LoganAug 22, 2025
  If lubricant is leaking at the cartridge inlet of your Ingersoll-Rand Water Pump, it could be due to a leak. Check the seals on the pump unit and replace them if needed. Also, ensure the cartridge is tightened correctly.
C
Christine ChangAug 28, 2025
Why is the lubricant quantity too high in my Ingersoll-Rand Water Pump?
- Z
  Zachary AllenAug 29, 2025
  If the lubricant quantity is too high in your Ingersoll-Rand Water Pump, the throttle might not be adjusted correctly. Turn the throttle clockwise by 1 to 2 notches to correct it.
L
Lonnie ReyesSep 3, 2025
How to increase lubricant quantity in my Ingersoll-Rand Easy lub 86603313 Water Pump?
- B
  Brandon BrewerSep 3, 2025
  If the lubricant quantity is too low in your Ingersoll-Rand Water Pump, the throttle is likely not adjusted correctly. Try turning the throttle anticlockwise by 1 to 2 notches.