Need help?Do you have a question about the Ingersoll-Rand GHH RAND SILU CS80 and is the answer not in the manual?
General| Brand | Ingersoll-Rand |
|---|---|
| Model | GHH RAND SILU CS80 |
| Category | Air Compressor |
| Language | English |
Defines the manual's scope for specific compressor units.
Manual intended for qualified specialist staff only.
Explains meaning of danger, warning, caution, notice, and note symbols.
Lists common faults, their causes, and recommended remedies.
Describes the intended use of GHH RAND screw compressors.
Provides contact details for GHH RAND.
Instructs users to refer to data plates for identification.
Details required information for spare parts and orders.
Points to the website for service and support information.
Lists dimensions, weight, pressures, and performance data for the CS80.
Lists dimensions, weight, speed ranges, and operating parameters for CS700 units.
Explains overpressure adjustment based on installation height.
Recommends specific lubricants and discusses warranty extensions.
Details information on compressor and unit type plates.
Emphasizes reading the manual for operation and maintenance.
States only trained, qualified personnel should perform work.
Lists relevant standards and regulations for safe operation.
Outlines owner duties for safe operation and material handling.
Prohibits unauthorized modifications and use of non-original parts.
Warns that incorrect operation risks injury and damage.
Advises proper disposal of components and materials.
Provides warnings for explosion, noise, hot parts, and overheating.
Details vehicle parking and permitted inclination for installation.
Warns about blowback risk and CS700 IC air supply.
Covers monitoring pressure, negative pressure, and oil pressure.
Describes monitoring gauges for CS80 and external units.
Details oil pressure gauge and negative pressure indicator for CS700 LITE.
Explains resetting maintenance indicators after fixing faults.
Explains displays for oil pressure, negative pressure, and air temperature for CS700 IC.
Describes operating display, fault indication, and air temperature monitoring.
Explains the settings for the cooling fan speed.
Discusses connecting an external oil cooler for improved service life.
Details how to check the function of the external oil cooler fan.
Provides procedures and warnings for safely switching off the compressor.
Advises protecting the compressor from corrosion during extended shutdowns.
Lists crucial safety precautions before and during maintenance.
Warns about correct tightening torques to prevent damage.
Outlines maintenance tasks by operating hours, weekly, quarterly, semi-annually.
Details specific maintenance tasks, starting with V-belt adjustment.
Explains adjusting V-belt tension and quick-release bushings.
Details procedure for retightening discharge silencer screws.
Provides instructions for checking and correcting oil level via dipstick.
Explains how to clean or replace the intake filter element.
Describes checking safety valve function and replacement.
Details checking and replacing the non-return valve.
Explains testing and cleaning the air cooler for IC units.
Provides instructions for oil change and oil intake strainer cleaning.
To Next Page
