Ingersoll-Rand Sierra SH 300 User Manual

72 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SL, SM & SH 90, 110, 132, 150, 200, 250 & 300 (50Hz)

L, H & HH 125, 150, 200, 250, 300, 350 & 400 (60Hz)

This manual contains

important safety information

and must be made available

to personnel who operate and

maintain this machine.

OPERATION AND MAINTENANCE MANUAL

LIBRO D’USO E MANUTENZIONE

MANUAL DE MANEJO Y MANTENIMIENTO

MANUAL DE OPERAÇAO E CONSERVAÇAO

C.C.N. : 80441306

REV. : D

DATE : JANUARY 2010

en pt it es

ENGLISH

PRINT LANGUAGE

PORTUGUESE

SPANISH

ITALIAN

Table of Contents

Questions and Answers:

P
Patrick MillerAug 25, 2025
What causes a Ingersoll-Rand Air Compressor to fail to load?
- M
  Michelle WatsonAug 25, 2025
  If your Ingersoll-Rand Air Compressor fails to load, start by checking for leaking seals in the hydraulic cylinder. If the cylinder doesn't fully stroke when the 'Load' button is pressed, overhaul the hydraulic cylinder. Also, check for a defective load solenoid valve by removing the tube that runs from the load solenoid valve to the hydraulic cylinder. Start the compressor and press the 'Load' button; if oil doesn't come out of the solenoid valve, replace it.
H
Hayden ShawAug 27, 2025
How to get rid of water in Ingersoll-Rand Air Compressor system?
- D
  denniswalterAug 28, 2025
  If you find water in your Ingersoll-Rand Air Compressor system, start by inspecting the moisture separator/drain trap for defects and clean if required; replace if defective. Check the trap drain and drain piping for any blockages and clean them. Inspect and clean the aftercooler core if it's dirty. Ensure all enclosure panels are in place. If the unit lacks an aftercooler, consider installing one. Finally, ensure the drain line/drip leg is correctly installed, sloping the drain line away from the trap and installing a drip leg.
R
russelljulieAug 31, 2025
Why is my Ingersoll-Rand Sierra SH 300 making so much noise?
- K
  Kathryn WoodsAug 31, 2025
  If your Ingersoll-Rand Air Compressor has an excessive noise level, inspect and tighten any loose component mountings. Ensure that all enclosure panels are in place. If the compressor itself is defective, contact an authorized distributor immediately and do not operate the unit.
P
Patricia MooreSep 4, 2025
What to do with excessive vibration of Ingersoll-Rand Sierra SH 300 Air Compressor?
- L
  Lisa SmithSep 4, 2025
  If your Ingersoll-Rand Air Compressor is experiencing excessive vibration, inspect and tighten any loose components. If the motor or compressor bearing has failed, contact an authorized distributor immediately and do not operate the unit. Inspect the area for other equipment that may be causing external vibrations.
J
Jennifer BallardSep 7, 2025
Why does the pressure relief valve keep opening on my Ingersoll-Rand Air Compressor?
- S
  Stephen PowellSep 8, 2025
  If the pressure relief valve on your Ingersoll-Rand Air Compressor opens, it could be due to the compressor operating over pressure; adjust the controller set points. Alternatively, the valve itself may be defective and require replacement.

Ingersoll-Rand Sierra SH 300 Specifications

General

Brand	Ingersoll-Rand
Model	Sierra SH 300
Category	Air Compressor
Language	English

Summary

Safety Precautions

Electrical Safety

Safety precautions related to electrical systems and connections.

Compressed Air Hazards

Hazards associated with compressed air and safety measures.

General Information

System Operation and Design

Overview of compressor operation, design pressures, temperatures, and key systems.

Installation and Handling

Plant Location and Commissioning

Motor Rotation Check

Importance and procedure for checking drive and fan motor rotation.

Operating Instructions

Control Panel Interface

System Status and Menus

Alarm and Warning Handling

Specific Alarm Conditions

Pre-Start and Decommissioning

Essential procedures before starting and after decommissioning the machine.

Maintenance Procedures

Routine Maintenance Schedule

Air Filter and Oil Service

Procedures for changing air filters and servicing the oil system.

Input Shaft Seal and Motor Bearings

Safety Precautions for Maintenance

Critical safety guidelines to follow before, during, and after maintenance.

Trouble Shooting Guide

Compressor Fails to Start/Stop

Troubleshooting steps for starting and unexpected shutdown issues.

System Air Pressure Issues

Diagnosing and resolving problems related to low system air pressure or leaks.

Temperature and Pressure Alarms

Motor and Control Faults

Load and Noise/Vibration Issues

Related product manuals

Ingersoll-Rand Sierra SH 132

Ingersoll-Rand Sierra SH 150

Ingersoll-Rand Sierra SH 200

Ingersoll-Rand Sierra H 300

Ingersoll-Rand Sierra HH 300

Ingersoll-Rand Sierra H 50

Ingersoll-Rand Sierra H 75

Ingersoll-Rand Sierra H 400

Ingersoll-Rand Sierra SL 75

Ingersoll-Rand Sierra H 350

Ingersoll-Rand Sierra H 250

Ingersoll-Rand Sierra H 125