Ingersoll-Rand Sierra H 300 User Manual

SL, SM & SH 90, 110, 132, 150, 200, 250 & 300 (50Hz)
L, H & HH 125, 150, 200, 250, 300, 350 & 400 (60Hz)
This manual contains
important safety information
and must be made available
to personnel who operate and
maintain this machine.
OPERATION AND MAINTENANCE MANUAL
LIBRO D’USO E MANUTENZIONE
MANUAL DE MANEJO Y MANTENIMIENTO
MANUAL DE OPERAÇAO E CONSERVAÇAO
C.C.N. : 80441306
REV. : D
DATE : JANUARY 2010
en pt it es
ENGLISH
PRINT LANGUAGE
PORTUGUESE
SPANISH
ITALIAN

Ingersoll-Rand Sierra H 300 Specifications

General

Model	Sierra H 300
Manufacturer	Ingersoll-Rand
Power Source	Electric
Motor Power	300 hp
Full Load Operating Pressure	100-125 psig
Cooling Method	Air Cooled
Type	Rotary Screw
Motor	TEFC

Summary

FOREWORD

Intended Uses and Unapproved Usage

DECALS 50Hz

Safety Warnings and Precautions

Highlights critical safety warnings related to electrical shock, pressure, and maintenance.

General Warning and Hazard Decals

Displays general warnings for hazards like exhaust gas and moving parts.

Operational Instructions Decals

Operational Prohibitions

Decals prohibiting actions like removing manuals or operating without guards.

DECALS 60Hz

Safety Warning Decals

Displays warnings for exposed moving parts, voltage, and hot surfaces.

SAFETY

Safety Alert Levels and Definitions

Defines hazard levels (Danger, Warning, Caution, Note) and their implications for safe operation.

Breathing Air and General Safety

Covers precautions for breathing air, general safety guidelines, and compressed air hazards.

Electrical System Safety

Outlines critical safety measures for working with the compressor's electrical system.

GENERAL INFORMATION

Compressor General Operation

Electrical System and Control Features

INSTALLATION / HANDLING

Commissioning Procedures

Outlines the steps to follow before putting the machine into service.

Plant Location Requirements

INSTALLATION / HANDLING

Water System Venting Procedure

Drive Motor Installation and Rotation Check

Details the procedure for checking the drive motor's rotation and installation.

Discharge Piping Requirements

Water System Draining Procedure

Fan Motor Installation and Rotation Check

Describes the process for checking the fan motor's rotation and installation.

Pre-Startup Safety Checks

Lists essential safety checks and procedures to perform before starting the machine.

Water Quality Recommendations

Specifies recommended water quality parameters and analysis frequency.

Cooling Water Piping Installation

Motor Rotation Check

OPERATING INSTRUCTIONS

INTELLISYS Control Panel Overview

Control Panel Functions and Navigation

Explains the operation of buttons, display screens, and navigation for the control panel.

Operator Setpoints Configuration

Covers how to adjust user-configurable setpoints for compressor operation.

Sensor Calibration and Alarm Handling

Guides through sensor calibration procedures and how to interpret alarms and warnings.

MAINTENANCE

Maintenance Schedule and Guidelines

Presents a schedule of tasks and general guidelines for routine maintenance.

Pre-Maintenance Safety Checks

Details critical safety checks required before performing any maintenance work.

Specific Maintenance Procedures

Motor Bearing Lubrication

TROUBLE SHOOTING

Troubleshooting Guide and Remedies

Provides an overview of common problems and their corresponding remedies for troubleshooting.

Compressor Start and Shutdown Issues

Addresses issues related to the compressor failing to start or shutting down unexpectedly.