To Next Page
K
Kenneth CameronAug 8, 2025
Why does my Ingersoll-Rand Water Filtration System compressor trip due to over temperature?
- Aashley44Aug 8, 2025
The compressor may be tripping due to several reasons. It might be operating above the rated pressure, so set the pressure to the correct rating. The package pre-filter could be blocked, requiring cleaning or replacement. A blocked cooler, missing or incorrectly fitted enclosure panels, low coolant level (top up coolant and check for leaks), high ambient temperature (re-site compressor), or restricted cooling air flow (ensure correct air flow to compressor) could also be the cause.
General
