Need help?Do you have a question about the Ingersoll-Rand UP6 25 and is the answer not in the manual?
General| Model | UP6 25 |
|---|---|
| Pressure | 125 PSI |
| Horsepower | 25 HP |
| Pump Type | Rotary Screw |
| Voltage | 460V |
| Phase | 3 |
| Type | Rotary Screw Compressor |
Covers essential safety measures for operation, electrical systems, compressed air, transport, and materials.
Addresses condensate disposal, connection to electrical systems, and safe practices.
Explains general operation, compression mechanism, cooling system, and load control of the compressor.
Details the electro-pneumatic control system with a schematic diagram, component key, and supporting notes.
Describes control panel elements, pre-startup checks, and the step-by-step process for starting the compressor.
Provides instructions for safely stopping the compressor during normal operation and in emergencies.
Outlines recommended maintenance tasks based on operating hours and time intervals.
Details essential safety practices and precautions to be observed before commencing any maintenance work.
Addresses problems like failure to start, periodic shutdowns, high/low current, and pressure issues with solutions.
Covers troubleshooting for over-temperature trips, excessive coolant use, noise, leaks, and valve malfunctions.
To Next Page