Ingersoll-Rand SSR UP6 25 User Manual

34 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SSR UP6 15, UP6 20, UP6 25, UP6 30

60Hz

This manual contains

important safety information

and must be made available

to personnel who operate and

maintain this machine.

C.C.N. : 22083729

REV. : C

DATE : JANUARY 2005

OPERATION AND MAINTENANCE MANUAL

Table of Contents

Other manuals for Ingersoll-Rand SSR UP6 25

Option Manual52 pages

Questions and Answers:

J
James MoralesAug 7, 2025
Why does my Ingersoll-Rand SSR UP6 25 Air Compressor trip due to overheating?
- M
  Marcus MartinAug 7, 2025
  Your Ingersoll-Rand Air Compressor may be tripping due to overheating for several reasons. It could be operating above its rated pressure, so ensure the pressure is set correctly. Other potential causes include a blocked package pre-filter (clean or replace it), a blocked cooler (clean it), missing or incorrectly fitted enclosure panels (ensure they are correctly fitted), low coolant level (top it up and check for leaks), high ambient temperature (relocate the compressor), or restricted cooling air flow (ensure correct airflow).
S
Seth Ramos MDAug 11, 2025
What to do if the pressure relief valve opens on my Ingersoll-Rand Air Compressor?
- B
  Brian ZunigaAug 11, 2025
  If the pressure relief valve on your Ingersoll-Rand Air Compressor is opening, it could be due to a defective switch or an incorrect pressure switch setting (replace or set the pressure correctly). Other potential causes include a malfunctioning minimum pressure valve (fit a minimum pressure valve service kit), a defective load solenoid valve (fit a load solenoid service kit), a defective blowdown valve (fit a blowdown solenoid service kit), or an inlet valve malfunction (fit an inlet valve service kit).
J
Joshua MillerAug 17, 2025
Why is there excessive noise level coming from my Ingersoll-Rand Air Compressor?
- S
  Sarah SnyderAug 17, 2025
  Excessive noise from your Ingersoll-Rand Air Compressor can stem from several issues. Check for air system leaks and fix them. The airend might be defective, requiring replacement. Slipping belts are another possibility, in which case you should replace the belt and tensioner. A defective motor or loose components could also be the cause; replace the motor or retighten any loose items.
R
Rick EdwardsAug 22, 2025
What causes black residue on the belt guard/cooler box of my Ingersoll-Rand SSR UP6 25?
- S
  Susan BakerAug 22, 2025
  Black residue on the belt guard or cooler box of your Ingersoll-Rand Air Compressor typically indicates a drive belt slipping. You should replace the belt and tensioner. Other possible causes include misaligned pulleys (re-align them), worn pulleys (replace pulleys and belt), or a failed gas strut (replace the belt and tensioner).
V
Victoria LambAug 27, 2025
Why is my Ingersoll-Rand SSR UP6 25 Air Compressor having excessive coolant consumption?
- B
  Beth MillerAug 27, 2025
  Excessive coolant consumption in your Ingersoll-Rand Air Compressor could be due to several reasons. There might be a separator cartridge leak, in which case you should fit a new separator cartridge. Another cause could be a blocked separator cartridge drain; remove the fittings and clean it. Also, check if the compressor is operating below the rated pressure and set the pressure correctly. Finally, inspect the coolant system for leaks and fix them.
A
Andrea HicksSep 1, 2025
What causes a shaft seal leak in my Ingersoll-Rand SSR UP6 25 Air Compressor?
- L
  Leslie GoodmanSep 1, 2025
  A shaft seal leak in your Ingersoll-Rand Air Compressor is typically caused by a defective shaft seal. To resolve this, fit an airend shaft seal kit.

Ingersoll-Rand SSR UP6 25 Specifications

General

Brand	Ingersoll-Rand
Model	SSR UP6 25
Category	Air Compressor
Language	English

Summary

Product Warranty Information

Machine Decals and Symbols

Comprehensive Safety Instructions

General Safety Precautions and Hazards

Covers DANGER, WARNING, CAUTION statements and general safety practices.

Compressed Air and Electrical Safety

Highlights risks associated with compressed air handling and electrical systems.

Installation and Handling Guidelines

Base Mounted Unit Dimensions and Features

Tank Mounted Unit Dimensions and Features

Technical Specifications and Data

Operating the Air Compressor

General Operation and System Description

Explains the compressor's function, ambient limits, and system components.

Control Panel and Operation Procedures

Describes control panel indicators and procedures for starting, stopping, and emergency shutdown.

Maintenance Procedures and Schedule

Routine Maintenance Schedule Overview

Coolant and Filter Maintenance

Troubleshooting Common Issues

Compressor Start-up and Operation Problems

Addresses issues like failure to start, periodic shutdowns, and current draw problems.

Pressure, Airflow, and Leakage Troubleshooting

Guides on resolving high discharge pressure, low system air pressure, and air leaks.

Over-Temperature and Noise Troubleshooting

Covers causes and remedies for compressor over-temperature and excessive noise.

Related product manuals

Ingersoll-Rand SSR UP6-5

Ingersoll-Rand SSR UP6 40

Preview: Ingersoll-Rand SSR UP6 15

Ingersoll-Rand SSR UP6 15

Ingersoll-Rand SSR UP6-10

Ingersoll-Rand SSR UP6-7.5

Ingersoll-Rand SSR UP6-15c

Ingersoll-Rand SSR UP6 50PEI

Ingersoll-Rand UP6 25

Preview: Ingersoll-Rand SSR UP5-4

Ingersoll-Rand SSR UP5-4

Ingersoll-Rand SSR UP5-11c

Ingersoll-Rand SSR-2000

Preview: INTELLISYS SSR Series

INTELLISYS SSR Series