Ingersoll-Rand VHP400WIR User Manual (English)

Other manuals for Ingersoll-Rand VHP400WIR

Operating & Maintenance Manual133 pages

Installation, Operation And Service Manual46 pages

Questions and Answers:

T
Tony GonzalezAug 9, 2025
What to do if Ingersoll-Rand VHP400WIR Air Compressor engine fails to start after 3 attempts?
- J
  Joshua MorrisonAug 10, 2025
  If the Ingersoll-Rand Air Compressor engine fails to start after three attempts, it could be due to weak batteries. Check the machine batteries to ensure they are charged and capable of cranking the engine. Alternatively, a restricted fuel system component could be the cause. Inspect the machine's fuel system, including filters, fuel tank(s), and associated piping.
M
Matthew Mcguire IVAug 18, 2025
How to troubleshoot Ingersoll-Rand VHP400WIR Air Compressor control panel if it doesn't turn on?
- N
  Nicole ParksAug 19, 2025
  If the Ingersoll-Rand Air Compressor control panel key is in the 'ON' position but the WEDGE controller annunciator lamps and LED display do not come on, take these steps: * Check the F1 fuse. * Check the operation of the control panel switch. * Check the battery voltage and battery disconnect switch. * Ensure the external pressure switch contact is functioning. * Check the auto start harness connections. * Ensure the CAN bus is operational. * Check the TB1 connections. * Verify the operation of the Auto - Manual switch (S1).
K
Kelsey ClarkAug 28, 2025
Why Ingersoll-Rand Air Compressor lost communication with Auto Start controller?
- M
  Mitchell MontoyaAug 28, 2025
  If the Ingersoll-Rand Air Compressor has lost communication with the Auto Start controller, check the power to the Auto Start controller. Also, verify the J1939 CAN communication connections to the Auto Start controller.