EasyManua.ls Logo

Ingersoll-Rand VHP400WIR - User Manual

Ingersoll-Rand VHP400WIR
133 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating & Maintenance Manual
Compressor Models
P600WIR (7/170), HP450WIR (10/125),
VHP400WIR (14/115)
Code:
This manual contains important safety information.
Do not destroy this manual.
This manual must be available to the personnel who operate and maintain this machine.
P.O. Box 868 - 501 Sanford Ave
Mocksville, N.C. 27028
Book 22442594 (1/07)
Doosan purchased Bobcat Company from Ingersoll-Rand Company in
2007. Any reference to Ingersoll-Rand Company or use of trademarks,
service marks, logos, or other proprietary identifying marks belonging
to Ingersoll-Rand Company in this manual is historical or nominative
in nature, and is not meant to suggest a current affiliation between
Ingersoll-Rand C
ompany and Doosan
Company or the products of
e
ith
er.
Revised (10-12)

Table of Contents

Other manuals for Ingersoll-Rand VHP400WIR

Preview: Electrical/Electronic Service Manual
Electrical/Electronic Service Manual105 pages
Preview: Installation, Operation And Service Manual
Installation, Operation And Service Manual46 pages

Questions and Answers

  • T
    Tony GonzalezAug 9, 2025
    What to do if Ingersoll-Rand VHP400WIR Air Compressor engine fails to start after 3 attempts?
    • J
      Joshua MorrisonAug 10, 2025
      If the Ingersoll-Rand Air Compressor engine fails to start after three attempts, it could be due to weak batteries. Check the machine batteries to ensure they are charged and capable of cranking the engine. Alternatively, a restricted fuel system component could be the cause. Inspect the machine's fuel system, including filters, fuel tank(s), and associated piping.
  • M
    Matthew Mcguire IVAug 18, 2025
    How to troubleshoot Ingersoll-Rand VHP400WIR Air Compressor control panel if it doesn't turn on?
    • N
      Nicole ParksAug 19, 2025
      If the Ingersoll-Rand Air Compressor control panel key is in the 'ON' position but the WEDGE controller annunciator lamps and LED display do not come on, take these steps: * Check the F1 fuse. * Check the operation of the control panel switch. * Check the battery voltage and battery disconnect switch. * Ensure the external pressure switch contact is functioning. * Check the auto start harness connections. * Ensure the CAN bus is operational. * Check the TB1 connections. * Verify the operation of the Auto - Manual switch (S1).
  • K
    Kelsey ClarkAug 28, 2025
    Why Ingersoll-Rand Air Compressor lost communication with Auto Start controller?
    • M
      Mitchell MontoyaAug 28, 2025
      If the Ingersoll-Rand Air Compressor has lost communication with the Auto Start controller, check the power to the Auto Start controller. Also, verify the J1939 CAN communication connections to the Auto Start controller.

Summary

WARRANTY AND REGISTRATION

Warranty Coverage Details

Warranty Registration Procedure

SAFETY PROCEDURES

General Safety Precautions

Essential safety warnings, cautions, and operational precautions.

Specific Hazard Safety Guidelines

GENERAL ARRANGEMENT & SPECIFICATIONS

Technical Specifications

OPERATING INSTRUCTIONS

Pre-Start Checks and Control Panel

Preparations before starting and operation of the control panel.

Starting, Stopping, and Diagnostics

Procedures for starting, stopping, and interpreting diagnostic codes.

ENGINE INSTRUCTIONS

Fuel, Lubricant, and Coolant Management

Engine Maintenance and Troubleshooting

Lubrication, maintenance intervals, and engine fault finding.

MAINTENANCE PROCEDURES

Maintenance Schedules and Routine Tasks

Periodic maintenance charts and routine procedures for the machine.

Component and System Maintenance

Lubrication and Adjustments

MACHINE SYSTEMS SCHEMATICS

FAULT FINDING

Engine and Compressor Troubleshooting

Guides for diagnosing and resolving engine and compressor issues.

NOISE EMISSION

Noise Control Information and Warranty

Ingersoll-Rand VHP400WIR Specifications

General IconGeneral
ModelVHP400WIR
TypeRotary Screw
Phase3
Drive TypeDirect Drive
Voltage460 V
Frequency60 Hz
Cooling MethodAir-Cooled
Horsepower400 hp

Related product manuals