11
Step 3:
Input the device default address 192.168.2.1 in the browser, enter the device Web page
management
(If the page indicates that the page is not secure, open hidden or advanced, select continue to go)
Figure 4-1-3 Login WEB Page Management
Step 4:
Configuration WAN port, click on the navigation bar "Network >>WAN/LAN Switch"
，
select
WAN mode to configure IP address of Wan port, so that the device can access to the Internet..
(Make sure the interface is in WAN mode, initial default LAN mode)
Figure 4-1-4 WAN Port Setup
To Next Page
Loading...
