Inhep Digital Security IDS 400 - LOCATIONS 56-71 Secondary Telephone Number

26 IDS400 INSTALLER MANUAL NO. 700-204-02A ISSUED NOV 2000 VER 1.01
IDS400 INSTALLER MANUAL
-
oitacoL
n
demmargorPeulaV
0401)edocaerafotigidts1(
143 )edocaerafotigiddn2(
241 )edocaerafotigiddr3(
3451)yaleddnoces4(
447 )rebmunenohpfotigidts1(
5401)rebmunenohpfotigiddn2(
645 )rebmunenohpfotigiddr3(
741 )rebmunenohpfotigidht4(
843 rebmunenohpfotigidht5(
947 )rebmunenohpfotigidht6(
053 )rebmunenohpfotigidht7(
150 )tigidpotS(
17-65SNOITACOLrebmuNenohpeleTyradnoceS
.oNcoL65758595061626364656667686960717
These locations contain the secondary telephone number that may be
up to sixteen digits long. The same procedures apply as for the
Primary Telephone Number.
Communicator Reporting Codes (Locations 72-88)
With the exception of Sescoa Superfast, all other communication
formats are 4 x 2 reporting formats which means that a 4 digit account
code will be reported with a 2 digit reporting code. It will be noted that
some reporting functions require that both digits of the reporting code
be programmed and other reporting codes only require a single digit to
be programmed. Reporting codes with only one digit will have the
second digit added automatically by the panel. An explanation is
provided under each reporting code. It is however important to note that
where ever space is provided for the programming of 2 reporting digits
i.e. locations 80 and 81 for zone 1 reporting code, BOTH DIGITS
MUST BE PROGRAMMED
.