Q&A About Abnormalities
Q1: What can you do if the screen displays “Er”, “---“ or
other unnormal values?
Answer: Please contact INKBIRD in time.
Q2: What can you do if the screen do not display any
value about P1 after inserting an external probe into the
P1 jack?
Answer: Please do as follows:
➀unplug the external probe;
➁insert it into the P1 jack again with steady force;
➂rotate the jack plug to make sure that it has good
contact with the P1 jack.
If the display problem is still unsolved, or the screen
displays “Er1”, please contact INKBIRD.
Q3: What can you do if the screen do not display any
value about P2 after inserting an external probe into the
P2 jack?
Answer: Please do as follows:
➀unplug the external probe;
➁insert it into the P2 jack again with steady force;
➂rotate the jack plug to make sure that it has good
contact with the P2 jack.
If the display problem is still unsolved, or the screen
displays “Er2”, please contact INKBIRD.
Q4: Why can’t you turn on/off the thermometer by
folding/unfolding the probe?
Answer: Please make sure both external probes are not
plugging in both jacks. The unfold-to-turn-on function
can only work without external probes.
Q5: Can you use the thermometer while the battery is
charging?
Answer: Yes.
20
To Next Page
