IMPULSE™ & AERO™
Diamond Glass Grinders
User Guide
Thank you for buying an Inland product. There are several unique features found on the Impulse™ and Aero™
grinders: Our TouchTop™, three-way switch allows the grinder to turn on automatically when you touch the work
surface. The coolant reservoir lifts off for easy cleaning. The open grid work surface is reversible. More than 18
different grinding heads and over a dozen Inland accessories are available for your grinder.
Safety
• When operating this or any grinder, it is extremely important to wear proper eye protection. We highly
recommend that safety goggles rather than safety glasses be worn. You may also choose to use an Inland
FaceShield™ or MagnaShield™ face shield in conjunction with eye protection;a shield alone does not
provide adequate protection.
• This machine is for use only in a grounded outlet!Please make sure that the outlet you are using is properly
grounded. Under NO circumstances should you override the grounding system.
• The best place to set up your grinder is on a sturdy, level workbench or table that is water tolerant and is a
comfortable height for you to work on.
Page 1
Set-up
The diagram below is an exploded drawing showing how the parts fit together. The parts chart lists what is in your
grinder carton depending on whether you bought an Impulse™ or Aero™ grinder. Take a minute to check that you
have all the parts indicated.
http://www.inlandcraft.com/Uguid... 7/13/2013
To Next Page
Need help?
General