have up to 5 usable sections of diamond. Inland makes bits in a variety of different sizes, grits and profiles to fit any
grinder.
Reversible work surface:
Another of the unique features on both the Impulse™ and Aero™ is the reversible work surface: when one side
becomes worn simply flip it over. This feature gives you twice the life of a standard grid surface.
Maintenance:
Maintenance to your grinder is minimal but important to prolonging the life and performance of the machine.
• The motor bearings are permanently sealed and lubricated so the motor is self maintaining.
• To prevent the bit from seizing on the shaft we suggest that you apply a small amount of MotorShaft
Lubricant™ to the shaft every time you change or remove a bit. We also recommend removing the bit from the
shaft if you will not be using the grinder for extended periods.
• To prevent damage to the motor shaft always make sure to mount the bit on the flat side of the shaft. Mounting
to the round side can scar the shaft preventing removal of the bit.
• The reservoir is the part that requires the most maintenance. As ground glass accumulates in the reservoir, it
can keep the bit from turning. Residue also hardens when it dries making it difficult to remove. Periodically the
reservoir needs removal and cleaning. First, remove the bit and work surface. The reservoir just lifts off the
grinder body. Remove the ground glass, rinse out the reservoir tray and reassemble.
Page 7
Popular Aero™ and Impulse™ Accessories:
FaceShield™ , Inland no. 50017:An clear acrylic shield that mounts on the back of your grinder for additional eye and
face protection.
MagnaShield™ , Inland no. 50018:This clear acrylic shield has a precision magnifying lens molded in for viewing
intricate and small details.
SecondStory™ Work Surface, Inland no. 50001:An elevated work surface for grinding intricate pieces when using
WB-8bits.
GrinderStation™ , Inland no. 50014:A washable vinyl, three-sided accessory that contains grinder spray.
MagnaLight™ , Inland no. 76020:A light with swing away magnifier and extra mounts that's easy to move from
grinder to bench top or other work areas.
SuperJet™ Cooling System, Inland no. 50002:Increases grinding speed and bit life. Includes two elevated work
surfaces.
Service
If you have any questions or comments regarding the use and operation of your Impulse™ or Aero™, please call
Inland Customer Service at 1-800-521-8428Monday through Friday from 9:00 am to 5:00 PM Eastern Standard Time
or contact at:
Inland Craft Products, Co.
32052 Edward
Madison Heights, MI 48071
Page 8
http://www.inlandcraft.com/Uguid... 7/13/2013
To Previous Page
Loading...