CONTOURA Operator Manual 9
The power electronics cannot be activated unless the applicator has been
connected to the System.
An audible tone indicates energy activation.
During activation, the System performs a self-test of the hardware.
Hardware is tested every 10msec to ensure proper operation of electrical circuit.
System starts at a low power setting.
Vacuum level monitoring. RF is disabled when vacuum is below the
predetermined level.
Skin temperature monitoring.
Safe Use of the Active Accessory
Examine the connection of Handpiece and connectors to the System before using.
Ensure that the accessory functions as intended. Improper connection may result
in arcs and sparks, accessory malfunction, or unintended treatment effects.
Do not wrap the Handpiece cords around metal objects. It may induce current that
could lead to electrical shocks, fire or injury to the patient or personal.
Ensure that electrodes are in full contact with the skin.
Bad coupling of both electrodes with the skin result in a specific warning sound, a
message on the screen, and disabling of RF.
Do not connect a wet accessory to the System.
Do not immerse the applicator under water at any time.
To Next Page
Loading...
