6
Code meaning Explanation
101/201 Current sampling failure of drive controller Controller malfunction, please reboot or contact after-sales service for replacement.
102/202 Hall fault of drive motor Motor malfunction, please contact after-sales service for replacement.
109/209 Instrument did not receive data from the drive controller Communication failure, the instrument did not receive the controller data.
110/210 Drive controller did not receive data from the instrument Communication failure, the controller did not receive data from the instrument.
111/211 MOS over-temperature of drive controller
The temperature of the controller board is too high, please stop riding and wait for
tcool down.
112/212 Overheating of drive motor
The motor temperature is too high, please stop riding and wait for the temperature to
decrease.
114/214 Overheating of drive MCU
The MCU temperature is too high, please stop riding and wait for the temperature to
decrease.
117/217 Overcurrent fault of drive controller Controller malfunction, please reboot or contact after-sales service for replacement.
118/218 Stuck fault of drive controller Motor stuck, please remove obstacles or contact after-sales service for replacement.
• The rst digit of a three-digit error code represents the faulty part, with 1 representing the front wheel and 2 representing the rear wheel
Notice:
ERROR CODE
Front/Rear Drive Controller Malfunction
To Next Page
Loading...
