Innova 2.0 Series User Manual (English)

Other manuals for Innova 2.0 Series

Questions and Answers:

Cynthia StoneAug 5, 2025

Why is my Innova Inverter not cooling or heating enough?

C
Cynthia LawsonAug 5, 2025
There could be several reasons why your Innova Inverter isn't cooling or heating adequately. It might be due to a temperature setting that is too high or too low – check and adjust the temperature on the remote control if needed. A clogged air filter can also cause this issue, so inspect the air filter and clean it if necessary. Ensure there are no obstructions to the airflow, either inside or outside. Remove any items blocking the airflow. Also, consider if the heating or cooling load has increased, perhaps due to an open door or window, or a heat-generating appliance in the room. Try to reduce the heating and cooling load by covering windows exposed to sunlight, keeping the room closed as much as possible, and avoiding the use of high-energy appliances.

Susan RobertsAug 20, 2025

What to do if Innova Inverter doesn’t switch on?

J
jeffrey55Aug 20, 2025
If your Innova Inverter isn't turning on, start by checking the power supply by testing another device. Then, make sure the thermal-magnetic circuit breaker hasn't tripped; if it has, reset it. If it trips again immediately, avoid further attempts to use the appliance. Check if the remote control batteries have run out by attempting to turn on the appliance using the touch-screen display and replace the batteries.

Brand	Innova
Model	2.0 Series
Category	Inverter
Language	English

Brand

Innova

Model

2.0 Series

Conformity and Markings

Appliance Markings

Displays regulatory and certification marks on the appliance.

Coding Information

Coding Accessories

Lists accessories used for product coding and their corresponding codes.

General Information and Warnings

About the User Manual

Explains the manual's purpose, structure, and user responsibilities for correct operation.

Product Pictograms

Explains symbols used on the appliance for safety and information.

User Roles and Responsibilities

Defines user roles like User, Installer, and Technical Service Centre.

Manual Organization

Describes how the manual is structured into sections for different target groups.

Product Disposal Instructions

Instructions for proper disposal of the product and electronic waste according to regulations.

General Safety Warnings

General safety precautions and warnings for operating the appliance.

Unit Operation with Touchpad and Remote

Touchpad and Remote Interface

Describes the touchpad and remote control interface for the unit.

Touchscreen Display Functions

Details the functions enabled by the touchpad and remote controls and their display icons.

Remote Control Details

Details the functions and operation of the remote control, including battery insertion.

Unit Main Functions

Covers essential operations like start-up, stand-by, and temperature setting.

Ventilation and Mode Control

Explains automatic function, ventilation speed, dehumidification, and ventilation modes.

Special Functions

Describes Night function, Moving Deflector Control, and Key Lock features.

Basic Menu Operations

Explains how to access and navigate the basic settings menu.

Menu Settings

Details settings like Scale, Buzzer volume, and Temperature offset.

Operational Warnings

Provides warnings related to operating the unit and displaying alarms.

Operating Without Remote Control

Instructions for operating the unit without the remote control.

M7 Series Control Panel

M7 Series Control Interface

Describes the touch interface and features of the M7 series control panel.

M7 Display and Key Functions

Explains the display elements, statuses, and key functions on the M7 control.

M7 Series Main Functions

Covers essential operations like start-up, stand-by, and temperature setting for M7 control.

M7 Mode and Speed Control

Details how to select modes, heating/cooling, and ventilation speeds on M7.

M7 Series Basic Menu Settings

Explains menu navigation and settings like Scale, Buzzer volume, and Temperature offset.

M7 Series Control Warnings

Provides warnings related to the M7 series control panel, including blockage reset.

Maintenance and Energy Saving

Pre-Maintenance Warnings

Essential safety precautions to take before performing any maintenance.

R32 Refrigerant Safety Warnings

Safety warnings specific to the R32 refrigerant gas used in the appliance.

Routine Maintenance Tasks

Outlines the regular maintenance tasks for the unit.

External Cleaning Procedure

Instructions for cleaning the exterior surfaces of the appliance.

Air Filter Cleaning

Detailed steps for removing and cleaning the air filters.

Long Period Shutdown

Procedures for preparing the unit for seasonal or extended periods of non-use.

Energy Saving Tips

Tips and recommendations for optimizing energy efficiency of the appliance.

Troubleshooting and Appliance Use

Troubleshooting Table

A table listing common anomalies, their possible causes, and remedies.

Normal Operation vs. Faults

Explains normal operational behaviours that might seem like faults.

Condensate Collection Warning

Information about the OF alarm and how to handle condensate drainage issues.

Appliance Usage Guidelines

Guidelines for proper and safe use of the appliance.

Technical Compliance and Safety

RED Compliance Statement

Declaration of compliance with the European Radio Equipment Directive.

General Safety Information

General safety information related to installation and use of electrical equipment.

FCC Declaration of Conformity

FCC compliance statement regarding radiation exposure and device limits.

WiFi Communication Notes

Information and precautions regarding the device's WiFi communication.

Innova 2.0 Series User Manual

Table of Contents