Innova 2.0 User Manual

12 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

ehpocaGEO

2.0

something new in the airsomething new in the air

8 - 10 - 12

EN

User manual

Other manuals for Innova 2.0

Installation Manual24 pages

Questions and Answers:

D
david00Aug 17, 2025
Why won't my Innova 2.0 turn on?
- J
  Joseph CarlsonAug 17, 2025
  If your Innova Inverter isn't turning on, there could be a few reasons. First, ensure that the appliance is receiving power by checking if a light can be turned on in the same outlet. Also, verify that the thermal-magnetic circuit breaker, which protects the appliance, hasn't been tripped; if it has, reset it. If the problem persists, contact the service center. Another possibility is that the remote control batteries are dead. Try turning on the appliance using the touch-screen display and replace the batteries if needed.
C
Cynthia BlakeAug 19, 2025
How to improve cooling/heating in my Innova 2.0?
- R
  Richard ShermanAug 19, 2025
  If your Innova Inverter isn't cooling or heating adequately, start by checking the temperature setting on the remote control and adjust it if necessary. Also, inspect the air filter and clean it if it's clogged. Ensure there are no obstructions to airflow, both inside and outside. Finally, reduce the heating or cooling load in the room by covering windows exposed to sunlight, keeping the room closed as much as possible, and avoiding the use of heat-generating appliances.
C
Chelsey ReyesAug 22, 2025
What to do if my Innova Inverter displays 'OF'?
- P
  Pamela FuentesAug 22, 2025
  If your Innova Inverter displays 'OF', it indicates that the maximum level float intervention has been triggered. During cooling and dehumidification, the system actively disperses excess water. During heating, condensation should drain freely. Check that the condensation pipe is not bent or obstructed, preventing water from flowing out.
D
Diana SchultzAug 25, 2025
What does 'E1' mean on my Innova Inverter?
- J
  Jason WardAug 26, 2025
  If your Innova Inverter displays 'E1', it indicates a faulty room temperature RT sensor. However, you can still use Cooling, Dehumidification, and Heating modes. This error only affects the antifreeze function of the internal coil.
C
calexanderAug 28, 2025
What does CP error mean on Innova Inverter?
- P
  Philip WeberAug 28, 2025
  If your Innova Inverter displays 'CP', it means there is an open CP contact. The appliance will only work if this contact is closed, so check that the clamps are properly connected.
M
Megan MendozaAug 30, 2025
What does 'E4' mean on Innova 2.0 Inverter display?
- J
  Julie BoydAug 30, 2025
  If your Innova Inverter displays 'E4', it indicates a faulty external coil OPT sensor. You can still use Cooling, Dehumidification, and Heating modes, but defrosting will occur at fixed intervals.
K
Kaylee WebsterSep 2, 2025
What does 'E2' error mean on my Innova 2.0 Inverter?
- M
  Michelle MaddoxSep 2, 2025
  If your Innova Inverter displays 'E2', it indicates a faulty internal coil IPT sensor. None of the modes can be activated.
F
Fred ReedSep 5, 2025
What does error E5 mean on Innova 2.0 Inverter?
- T
  Thomas BrownSep 5, 2025
  If your Innova Inverter displays 'E5', it indicates a faulty internal fan motor. None of the modes can be activated.
S
Sarah EvansSep 7, 2025
What does 'E6' error mean on my Innova 2.0 Inverter?
- K
  Kristi Frank DDSSep 7, 2025
  If your Innova Inverter displays 'E6', it indicates a faulty external fan motor, and none of the modes can be activated.
W
William MccannSep 12, 2025
What does 'E7' error signify on Innova Inverter?
- M
  Miranda BaldwinSep 12, 2025
  If your Innova Inverter displays 'E7', it indicates a lack of communication with the display. None of the modes can be activated.

Innova 2.0 Specifications

General

Continuous Power	2000W
Peak Power	4000W
Waveform	Pure Sine Wave
Output Frequency	50Hz
Cooling	Fan
Protection	Overload, Short Circuit

Summary

Warning

Management of the appliance with the touch-screen display

Description of machine functioning

General start-up and management

Problem diagnosis

Operating aspects that must not be interpreted as problems

Troubleshooting

The appliance doesn't switch on

Troubleshooting steps for when the appliance fails to power on.

The appliance does not cool/heat enough

Steps to address insufficient cooling or heating performance.

Display alarms

Explains various alarm codes displayed by the appliance.

Periodic Maintenance

External cleaning

Cleaning filtering seats

Related product manuals

Preview: Innova 2.0 Series

Innova 2.0 Series

Preview: Innova Ephoca HPAC 2.0

Innova Ephoca HPAC 2.0

Preview: Innova SL

Preview: Innova ECA644

Preview: Innova Filomuro SLW 400

Innova Filomuro SLW 400

Preview: Innova AirLeaf ECA644

Innova AirLeaf ECA644

Innova AirLeaf E4T643

Innova AirLeaf B4V642

Innova AirLeaf B3V137

Preview: Innova Filomuro SLW Series

Innova Filomuro SLW Series