DA2 Installation Guide
1.0 System Requirements
1.1 Operating systems
To use the DA2 kit you must ensure that your PC’s operating is one of the following
• Windows 98
• Windows 98SE
• Windows 2000
• Windows XP Home
• Windows XP Professional
Windows 95 and Windows NT do not support USB devices. However you can use a DA1 kit –
this will allow you to use any of the current Innovative Technology Bank Note Validator download
tools.
1.2 Hardware
The DA2 is a Universal Serial Bus (USB) device. It must be connected to a USB port on your
PC.
A USB type-A to type-B cable is included with the DA2. The type-A plug connects to your PC.
The type-B plug connects to the DA2. The USB ports on your PC will be marked with the following
symbol.
2.0 Windows Installation
To install a DA2 you do not need to connect a Bank Note Validator or a power supply. Simply
connect the DA2 to the PC with the included USB cable.
Innovative Technology Ltd Page 4 of 12
To Next Page
Loading...