EasyManua.ls Logo

Inogen One G4 - Device Classifications

Inogen One G4
312 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Contains Transmitter Module IC: 12246A-BM71S2. Contains FCC ID: A8TBM71S2
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: IT-network is a system composed of wireless (Bluetooth) transmission between the
Inogen One® G4 and the Inogen Connect Application.
Connection of the Inogen One® G4 to an IT-Network could result in previously unidentified
risks to patients, operators or third parties.
Subsequent changes to the IT-network could introduce new risks and require additional
analysis
Changes to the IT-network include:
º
Changes in the IT-network configuration;
º
Connection of additional items to the IT-network
º
Disconnecting items from the IT-network
º
Updating equipment connected to the IT-network
Classifications
Mode of Operation: Continuous Duty
Type of Protection Against Electrical
Shock:
Class II
Degree of Protection to Concentrator
Components Against Electrical Shock:
Type BF
Not intended for cardiac application
Degree of Protection to Concentrator
Components Against Ingress of Water:
IP22 - Vertically dripping water shall have no
harmful effect & protect against ingress
of solid objects 12.5 mm. diameter
when the enclosure is tilted at an angle
up to 15˚ from its normal position*
Degree of Safety for Application in
Presence of Anesthetic Gases:
Not suitable for such application
*Normal position of the Inogen One® G4 is upright with the user interface display facing upward.

Other manuals for Inogen One G4

Related product manuals