Inova APIX2 ADK User Manual

UM_INAP375R Revision 1.2_A1 Inova Semiconductors Confidential Page 7 of 37
User Manual
3.0 Hardware description
3.1 Board connectors
3.1.1 Standard connectors and interfaces
• 2 HDMI connectors for video input
• 1 USB2.0 connector for interfacing the boards’s μC to the PC
• 1 RS232 for ISP (In Circuit Programming) of the μC
• Single 9V..18V (Typ. 12V) DC power supply input to generate all board supplies
• APIX Serial High Speed Interface with either Rosenberger HSD or Molex MX49 connector
3.1.2 Connectors and interfaces for bench setups
• Direct power supply input to all LDOs (3.9V and 2.1V) allows to disable all DC/DC switcher (EMI tests)
• UART interface alternatively to USB2.0 with 3.3V supply to hook up a POF module (EMI tests)
• APIX I2S audio interface on pin header
• APIX SPI slave interlace on pin header
• APIX I2C interlace on pin header
• APIX GPIO interlace on pin header
• 2 Stereo audio line in
• μC JTAG interface
• μC MII interlace
3.1.3 Connectors and interfaces to expansion boards
•APIX pixel interface
• APIX data interface
• 12V, 3.3V and 1.8V power supply
• μC ports
• I2C_0 and I2C_1 bus (from μC)

Inova APIX2 ADK Specifications

General

Brand	Inova
Model	APIX2 ADK
Category	Transmitter
Language	English